Industrial Ethernet Switch

About Industrial Ethernet Switch

• 8 10/100/1000Base-T PoE(PSE) ports
• Based on IEEE 802.3at standard up to 30Watts per port. Backward compatible with IEEE 802.3af
• Jumbo frame size up to 9,216 Bytes
• 50 to 57VDC redundant terminal block power input
• Auto warning by relay output for power failure
• Compatible with various industrial protocols of EtherNet/IP, Profinet, CC-LINK IE and DNP 3.0

• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-T(X) and 100Base-FX
• IEEE 802.3ab 1000Base-T
• IEEE 802.3x Flow Control
• IEEE 802.3af PoE 15.4 Watts
• IEEE 802.3at PoE 30 Watts

• Store and Forward
• IEEE 802.3x Flow control in full duplex, back-pressure flow control in half duplex

• Gigabit Ethernet
• RJ45 Ports: 8 10/100/1000Base-T, auto MDI/MDI-X, auto negotiation
• PoE+ Pingout: 1&2 DC+, 3&6 DC-
• DIP Switches
•  Power failure alarm
• Alarm Contact(DO)
• 1 relay output
•  Carry current 1A@24VDC

• Switching Capacity: 16Gbps, wired-speed, non-blocking switching fabric
• Forwarding Rate: 11.9Mpps
• MAC Address Table: 2K
•  Packet Buffer Memory: 1.5M bits
•  Jumbo Frame: 9,216 Bytes

• Input Voltage: 2 sets, 50 to 57VDC redundant terminal block input
• Input Current: Max. 5A (with powered device); Max. 0.16A (without powered device)
• Overload Current Protection: Present, max. input current 10A
• Reverse Polarity Protection: NOT Present